Stainless steel body RFID card reader dorp arm turnstile with access control system software
Introduction of Drop Arm Turnstile:
1. Alarm function: when arms are pushed by force illegally, alarm will be triggered automatically and arms will be set locked.
2. Anti-pinch function: turnstile have Mechanical / infrared induction Anti-pinch functions (when it is meet the hinder during the reset time, the electrical machine closed work automatically in specified time, the turnstile will default the delayed and reset again till reset succeed), small intensity (≤2Kg).
Applications of Drop Arm Turnstile:
Can be widely used in the metro station, wharf, subway station, bus station, factories, office building , hotel, clubs, school, library, supermarket and institution that need intelligent access management.
Features of Drop Arm Turnstile:
- Fault detection and alarm functions, easy to use and maintenance.
- The running status can be programmed and controlled with the built-in keyboard on the main board.
- Mechanical antipinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again later.
- Anti-breakthrough function. The gate is locked automatically until opening signal received.
- Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
- Gate can be set as normally open or normally closed.
- Can be used with variety of access control devices: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed).
- Direction can be set as single-direction or bi-direction.
- Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
- Alarm function, in case of illegal intrusion and reverse intrusion, etc.
Specifications of Drop Arm Turnstile:
| Item | Specification |
| Power supply | AC220±10%V 50Hz/AC110±10% 60Hz |
| Access device input voltage | Dry contact or 12V electrical level signal or > 100ms 12V impulse signal, driving current > 10mA |
| Motor voltage | DC 24V (brush motor) |
| Max flow rate | 25 to 30 person per minute |
| Flap opening / closing time | 1s |
| Reset time when power on | 3s |
| Working temperature | -20°C~60°C |
Cases of Drop Arm Turnstile:
Product Tags:
|
|
304 Stainless Steel Drop Arm Turnstile Images
|
